diff options
Diffstat (limited to 'config')
| -rw-r--r-- | config/printer-makergear-m2-2012.cfg | 16 |
1 files changed, 9 insertions, 7 deletions
diff --git a/config/printer-makergear-m2-2012.cfg b/config/printer-makergear-m2-2012.cfg index 7993fba8..03ae2bd0 100644 --- a/config/printer-makergear-m2-2012.cfg +++ b/config/printer-makergear-m2-2012.cfg @@ -7,35 +7,36 @@ step_pin: PC0 dir_pin: !PL1 enable_pin: !PA7 -step_distance: .0225 +microsteps: 8 +rotation_distance: 36 endstop_pin: ^!PB6 position_endstop: 0.0 position_max: 200 homing_speed: 50 [endstop_phase stepper_x] -phases: 32 endstop_accuracy: .200 [stepper_y] step_pin: PC1 dir_pin: PL0 enable_pin: !PA6 -step_distance: .0225 +microsteps: 8 +rotation_distance: 36 endstop_pin: ^!PB5 position_endstop: 0.0 position_max: 250 homing_speed: 50 [endstop_phase stepper_y] -phases: 32 endstop_accuracy: .200 [stepper_z] step_pin: PC2 dir_pin: !PL2 enable_pin: !PA5 -step_distance: .005 +microsteps: 8 +rotation_distance: 8 endstop_pin: ^!PB4 position_min: 0.1 position_endstop: 0.7 @@ -43,14 +44,15 @@ position_max: 200 homing_retract_dist: 2.0 [endstop_phase stepper_z] -phases: 32 endstop_accuracy: .070 [extruder] step_pin: PC3 dir_pin: PL6 enable_pin: !PA4 -step_distance: .004242 +microsteps: 8 +gear_ratio: 57:11 +rotation_distance: 35.170 nozzle_diameter: 0.350 filament_diameter: 1.750 heater_pin: PH6 |