1 files changed, 75 insertions, 0 deletions
diff --git a/config/creality-cr10s-2017.cfg b/config/creality-cr10s-2017.cfg
new file mode 100644
index 00000000..b2b74b20
--- /dev/null
+++ b/config/creality-cr10s-2017.cfg
@@ -0,0 +1,75 @@
+# This file contains pin mappings for the 2017 Creality CR-10S. To use
+# this config, the firmware should be compiled for the AVR atmega2560.
+
+# See the example.cfg file for a description of available parameters.
+
+[stepper_x]
+step_pin: ar54
+dir_pin: ar55
+enable_pin: !ar38
+step_distance: .0125
+endstop_pin: ^ar3
+position_endstop: 0
+position_max: 300
+homing_speed: 50
+
+[stepper_y]
+step_pin: ar60
+dir_pin: ar61
+enable_pin: !ar56
+step_distance: .0125
+endstop_pin: ^ar14
+position_endstop: 0
+position_max: 300
+homing_speed: 50
+
+[stepper_z]
+step_pin: ar46
+dir_pin: !ar48
+enable_pin: !ar62
+step_distance: .0025
+endstop_pin: ^ar18
+position_endstop: 0.5
+position_max: 200
+
+[extruder]
+step_pin: ar26
+dir_pin: ar28
+enable_pin: !ar24
+step_distance: .010526
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: ar10
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: analog13
+control: pid
+pid_Kp: 22.2
+pid_Ki: 1.08
+pid_Kd: 114
+min_temp: 0
+max_temp: 250
+
+[heater_bed]
+heater_pin: ar8
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: analog14
+control: pid
+pid_Kp: 690.34
+pid_Ki: 111.47
+pid_Kd: 1068.83
+min_temp: 0
+max_temp: 130
+
+[fan]
+pin: ar9
+
+[mcu]
+serial: /dev/ttyUSB0
+pin_map: arduino
+
+[printer]
+kinematics: cartesian
+max_velocity: 300
+max_accel: 3000
+max_z_velocity: 5
+max_z_accel: 100