diff options
Diffstat (limited to 'config')
| -rw-r--r-- | config/example-extras.cfg | 18 |
1 files changed, 18 insertions, 0 deletions
diff --git a/config/example-extras.cfg b/config/example-extras.cfg index 97183b7c..67b725b4 100644 --- a/config/example-extras.cfg +++ b/config/example-extras.cfg @@ -27,6 +27,24 @@ # activation. +# Multi-stepper axes. On a cartesian style printer, the stepper +# controlling a given axis may have additional config blocks defining +# steppers that should be stepped in concert with the primary +# stepper. One may define any number of sections with a numeric suffix +# starting at 1 (for example, "stepper_z1", "stepper_z2", etc.). +#[stepper_z1] +#step_pin: ar36 +#dir_pin: ar34 +#enable_pin: !ar30 +#step_distance: .005 +# See the example.cfg for the definition of the above parameters. +#endstop_pin: ^ar19 +# If an endstop_pin is defined for the additional stepper then the +# stepper will home until the endstop is triggered. Otherwise, the +# endstop will home until the endstop on the primary stepper for the +# axis is triggered. + + # Heater cooling fans (one may define any number of sections with a # "heater_fan" prefix). A "heater fan" is a fan that will be enabled # whenever its associated heater is active. In the event of an MCU |