diff options
Diffstat (limited to 'config')
| -rw-r--r-- | config/example-extras.cfg | 6 | ||||
| -rw-r--r-- | config/sample-macros.cfg | 21 |
2 files changed, 27 insertions, 0 deletions
diff --git a/config/example-extras.cfg b/config/example-extras.cfg index a4e52dde..2a2e8ccf 100644 --- a/config/example-extras.cfg +++ b/config/example-extras.cfg @@ -1142,3 +1142,9 @@ # default_prefix: echo: # Directly sets the default prefix. If present, this value will override # the "default_type". + +# Pause/Resume functionality with support of position capture and restore +#[pause_resume] +#recover_velocity: 50. +# When capture/restore is enabled, the speed at which to return to +# the captured position (in mm/s). Default is 50.0 mm/s. diff --git a/config/sample-macros.cfg b/config/sample-macros.cfg index 10854b58..1f6d84a1 100644 --- a/config/sample-macros.cfg +++ b/config/sample-macros.cfg @@ -34,3 +34,24 @@ #gcode: SET_PIN PIN=BEEPER_pin VALUE={S} # G4 P{P} # SET_PIN PIN=BEEPER_pin VALUE=0 + +# M600: Filament Change. This macro will pause the printer, move +# the tool to the change position, and retract the filament 50mm. +# Adjust the retraction settings for your own extruder. After filament +# has been changed, the print can be resumed from its previous position +# with the "RESUME" gcode +# +#[gcode_macro M600] +#default_parameter_X: 50 +#default_parameter_Y: 0 +#default_parameter_Z: 10 +#gcode: +# PAUSE +# G91 +# G1 E-.8 F2700 +# G1 Z{Z} +# G90 +# G1 X{X} Y{Y} F3000 +# G91 +# G1 E-50 F1000 +# G90 |