diff options
Diffstat (limited to 'config')
| -rw-r--r-- | config/example-extras.cfg | 9 |
1 files changed, 8 insertions, 1 deletions
diff --git a/config/example-extras.cfg b/config/example-extras.cfg index 9a792afa..bd39e99b 100644 --- a/config/example-extras.cfg +++ b/config/example-extras.cfg @@ -2,11 +2,18 @@ # additional devices that may be configured on a printer. The snippets # in this file may be copied into the main printer.cfg file. See the # "example.cfg" file for description of common config parameters. +# +# Note, where an extra config section creates additional pins, the +# section defining the pins must be listed in the config file before +# any sections using those pins. # Z height probe. One may define this section to enable Z height # probing hardware. When this section is enabled, PROBE and -# QUERY_PROBE extended g-code commands become available. +# QUERY_PROBE extended g-code commands become available. The probe +# section also creates a virtual probe:z_virtual_endstop pin. One may +# set the stepper_z endstop_pin to this virtual pin on cartesian style +# printers that use the probe in place of a z endstop. #[probe] #pin: ar15 # Probe detection pin. This parameter must be provided. |