1 files changed, 29 insertions, 30 deletions
diff --git a/config/printer-tevo-tarantula-pro-2020.cfg b/config/printer-tevo-tarantula-pro-2020.cfg
index 9a32c83b..b4efd63d 100644
--- a/config/printer-tevo-tarantula-pro-2020.cfg
+++ b/config/printer-tevo-tarantula-pro-2020.cfg
@@ -8,58 +8,58 @@
 # See docs/Config_Reference.md for a description of parameters.
 
 [stepper_x]
-step_pin: ar54
-dir_pin: !ar55
-enable_pin: !ar38
+step_pin: PF0
+dir_pin: !PF1
+enable_pin: !PD7
 microsteps: 16
 rotation_distance: 40
-endstop_pin: ^!ar3
+endstop_pin: ^!PE5
 position_endstop: -2
 position_max: 220
 position_min: -2
 homing_speed: 25.0
 
 [stepper_y]
-step_pin: ar60
-dir_pin: ar61
-enable_pin: !ar56
+step_pin: PF6
+dir_pin: PF7
+enable_pin: !PF2
 microsteps: 16
 rotation_distance: 40
-endstop_pin: ^!ar14
+endstop_pin: ^!PJ1
 position_endstop: 0
 position_max: 220
 homing_speed: 25.0
 
 [stepper_z]
-step_pin: ar46
-dir_pin: ar48
-enable_pin: !ar62
+step_pin: PL3
+dir_pin: PL1
+enable_pin: !PK0
 microsteps: 16
 rotation_distance: 8
-endstop_pin: ^!ar18
+endstop_pin: ^!PD3
 position_endstop: 0
 position_max: 200
 
 # Enable for dual-z addon
 #[stepper_z1]
-#step_pin: ar36
-#dir_pin: ar34
-#enable_pin: !ar30
+#step_pin: PC1
+#dir_pin: PC3
+#enable_pin: !PC7
 #microsteps: 16
 #rotation_distance: 8
 
 [extruder]
-step_pin: ar26
-dir_pin: ar28
-enable_pin: !ar24
+step_pin: PA4
+dir_pin: PA6
+enable_pin: !PA2
 microsteps: 16
 rotation_distance: 7.904
 nozzle_diameter: 0.400
 filament_diameter: 1.75
 
-heater_pin: ar10
+heater_pin: PB4
 sensor_type: EPCOS 100K B57560G104F
-sensor_pin: analog13
+sensor_pin: PK5
 control: pid
 pid_Kp: 22.5
 pid_Ki: 1.78
@@ -68,19 +68,18 @@ min_temp: 0
 max_temp: 220
 
 [heater_bed]
-heater_pin: ar8
+heater_pin: PH5
 sensor_type: EPCOS 100K B57560G104F
-sensor_pin: analog14
+sensor_pin: PK6
 control: watermark
 min_temp: 0
 max_temp: 110
 
 [fan]
-pin: ar9
+pin: PH6
 
 [mcu]
 serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0
-pin_map: arduino
 
 [printer]
 kinematics: cartesian
@@ -90,13 +89,13 @@ max_z_velocity: 50
 max_z_accel: 100
 
 [heater_fan nozzle_fan]
-pin: ar7
+pin: PH4
 
 [display]
 lcd_type: uc1701
-cs_pin: ar25
-a0_pin: ar27
-encoder_pins: ^!ar31, ^!ar33
-click_pin: ^!ar35
-kill_pin: !ar41
+cs_pin: PA3
+a0_pin: PA5
+encoder_pins: ^!PC6, ^!PC4
+click_pin: ^!PC2
+kill_pin: !PG0
 menu_reverse_navigation: true