diff options
Diffstat (limited to 'config/printer-lulzbot-taz6-dual-v3-2017.cfg')
| -rw-r--r-- | config/printer-lulzbot-taz6-dual-v3-2017.cfg | 15 |
1 files changed, 10 insertions, 5 deletions
diff --git a/config/printer-lulzbot-taz6-dual-v3-2017.cfg b/config/printer-lulzbot-taz6-dual-v3-2017.cfg index c018af27..38248f0d 100644 --- a/config/printer-lulzbot-taz6-dual-v3-2017.cfg +++ b/config/printer-lulzbot-taz6-dual-v3-2017.cfg @@ -33,7 +33,8 @@ step_pin: PC0 dir_pin: PL1 enable_pin: !PA7 -step_distance: .010000 +microsteps: 16 +rotation_distance: 32 endstop_pin: ^PB6 position_endstop: -20 position_min: -20 @@ -45,7 +46,8 @@ second_homing_speed: 5 step_pin: PC1 dir_pin: !PL0 enable_pin: !PA6 -step_distance: .010000 +microsteps: 16 +rotation_distance: 32 endstop_pin: ^PA1 position_endstop: 306 position_min: -17 @@ -57,7 +59,8 @@ second_homing_speed: 5 step_pin: PC2 dir_pin: PL2 enable_pin: !PA5 -step_distance: 0.000625 +microsteps: 16 +rotation_distance: 2 endstop_pin: ^!PB4 position_endstop: 5.0 position_min: -5.8 @@ -72,7 +75,8 @@ second_homing_speed: 1 step_pin: PC4 dir_pin: !PL7 enable_pin: !PA3 -step_distance: 0.001315789473 +microsteps: 16 +rotation_distance: 4.211 nozzle_diameter: 0.500 filament_diameter: 2.850 heater_pin: PH4 @@ -93,7 +97,8 @@ min_extrude_temp: 120 step_pin: PC3 dir_pin: PL6 enable_pin: !PA4 -step_distance: 0.001315789473 +microsteps: 16 +rotation_distance: 4.211 nozzle_diameter: 0.500 filament_diameter: 2.850 heater_pin: PH6 |