diff options
Diffstat (limited to 'config/printer-anycubic-kossel-plus-2017.cfg')
| -rw-r--r-- | config/printer-anycubic-kossel-plus-2017.cfg | 63 |
1 files changed, 31 insertions, 32 deletions
diff --git a/config/printer-anycubic-kossel-plus-2017.cfg b/config/printer-anycubic-kossel-plus-2017.cfg index 12c61102..de984caa 100644 --- a/config/printer-anycubic-kossel-plus-2017.cfg +++ b/config/printer-anycubic-kossel-plus-2017.cfg @@ -8,12 +8,12 @@ # See docs/Config_Reference.md for a description of parameters. [stepper_a] -step_pin: ar54 -dir_pin: !ar55 -enable_pin: !ar38 +step_pin: PF0 +dir_pin: !PF1 +enable_pin: !PD7 microsteps: 16 rotation_distance: 40 -endstop_pin: ^ar2 +endstop_pin: ^PE4 homing_speed: 60 # The next parameter needs to be adjusted for # your printer. You may want to start with 280 @@ -23,32 +23,32 @@ position_endstop: 295.6 arm_length: 269.0 [stepper_b] -step_pin: ar60 -dir_pin: !ar61 -enable_pin: !ar56 +step_pin: PF6 +dir_pin: !PF7 +enable_pin: !PF2 microsteps: 16 rotation_distance: 40 -endstop_pin: ^ar15 +endstop_pin: ^PJ0 [stepper_c] -step_pin: ar46 -dir_pin: !ar48 -enable_pin: !ar62 +step_pin: PL3 +dir_pin: !PL1 +enable_pin: !PK0 microsteps: 16 rotation_distance: 40 -endstop_pin: ^ar19 +endstop_pin: ^PD2 [extruder] -step_pin: ar26 -dir_pin: !ar28 -enable_pin: !ar24 +step_pin: PA4 +dir_pin: !PA6 +enable_pin: !PA2 microsteps: 16 rotation_distance: 33.333 nozzle_diameter: 0.400 filament_diameter: 1.750 -heater_pin: ar10 +heater_pin: PB4 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog13 +sensor_pin: PK5 control: pid pid_Kp: 25.349 pid_Ki: 1.216 @@ -58,9 +58,9 @@ min_temp: 0 max_temp: 275 [heater_bed] -heater_pin: ar8 +heater_pin: PH5 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog14 +sensor_pin: PK6 control: pid pid_kp: 73.517 pid_ki: 1.132 @@ -69,21 +69,20 @@ min_temp: 0 max_temp: 130 [fan] -pin: ar9 +pin: PH6 kick_start_time: 0.200 [heater_fan extruder_cooler_fan] -pin: ar44 +pin: PL5 # if you want to use your probe for DELTA_CALIBRATE you will need that #[probe] -#pin: ^ar18 +#pin: ^PD3 #z_offset: 15.9 #samples: 3 [mcu] serial: /dev/ttyUSB0 -pin_map: arduino [printer] kinematics: delta @@ -105,12 +104,12 @@ radius: 115 # "RepRapDiscount 2004 Smart Controller" type displays [display] lcd_type: hd44780 -rs_pin: ar16 -e_pin: ar17 -d4_pin: ar23 -d5_pin: ar25 -d6_pin: ar27 -d7_pin: ar29 -encoder_pins: ^ar31, ^ar33 -click_pin: ^!ar35 -kill_pin: ^!ar41 +rs_pin: PH1 +e_pin: PH0 +d4_pin: PA1 +d5_pin: PA3 +d6_pin: PA5 +d7_pin: PA7 +encoder_pins: ^PC6, ^PC4 +click_pin: ^!PC2 +kill_pin: ^!PG0 |