diff options
Diffstat (limited to 'config/generic-rumba.cfg')
| -rw-r--r-- | config/generic-rumba.cfg | 95 |
1 files changed, 47 insertions, 48 deletions
diff --git a/config/generic-rumba.cfg b/config/generic-rumba.cfg index abfa7a0a..efc7398a 100644 --- a/config/generic-rumba.cfg +++ b/config/generic-rumba.cfg @@ -4,51 +4,51 @@ # See docs/Config_Reference.md for a description of parameters. [stepper_x] -step_pin: ar17 -dir_pin: ar16 -enable_pin: !ar48 +step_pin: PH0 +dir_pin: PH1 +enable_pin: !PL1 microsteps: 16 rotation_distance: 40 -endstop_pin: ^ar37 -#endstop_pin: ^ar36 +endstop_pin: ^PC0 +#endstop_pin: ^PC1 position_endstop: 0 position_max: 200 homing_speed: 50 [stepper_y] -step_pin: ar54 -dir_pin: !ar47 -enable_pin: !ar55 +step_pin: PF0 +dir_pin: !PL2 +enable_pin: !PF1 microsteps: 16 rotation_distance: 40 -endstop_pin: ^ar35 -#endstop_pin: ^ar34 +endstop_pin: ^PC2 +#endstop_pin: ^PC3 position_endstop: 0 position_max: 200 homing_speed: 50 [stepper_z] -step_pin: ar57 -dir_pin: ar56 -enable_pin: !ar62 +step_pin: PF3 +dir_pin: PF2 +enable_pin: !PK0 microsteps: 16 rotation_distance: 40 -endstop_pin: ^ar33 -#endstop_pin: ^ar32 +endstop_pin: ^PC4 +#endstop_pin: ^PC5 position_endstop: 0.5 position_max: 200 [extruder] -step_pin: ar23 -dir_pin: ar22 -enable_pin: !ar24 +step_pin: PA1 +dir_pin: PA0 +enable_pin: !PA2 microsteps: 16 rotation_distance: 33.500 nozzle_diameter: 0.400 filament_diameter: 1.750 -heater_pin: ar2 +heater_pin: PE4 sensor_type: EPCOS 100K B57560G104F -sensor_pin: analog15 +sensor_pin: PK7 control: pid pid_Kp: 22.2 pid_Ki: 1.08 @@ -57,38 +57,37 @@ min_temp: 0 max_temp: 250 #[extruder1] -#step_pin: ar26 -#dir_pin: ar25 -#enable_pin: !ar27 -#heater_pin: ar3 -#sensor_pin: analog14 +#step_pin: PA4 +#dir_pin: PA3 +#enable_pin: !PA5 +#heater_pin: PE5 +#sensor_pin: PK6 #... #[extruder2] -#step_pin: ar29 -#dir_pin: ar28 -#enable_pin: !ar39 -#heater_pin: ar6 -#sensor_pin: analog13 +#step_pin: PA7 +#dir_pin: PA6 +#enable_pin: !PG2 +#heater_pin: PH3 +#sensor_pin: PK5 #... [heater_bed] -heater_pin: ar9 +heater_pin: PH6 sensor_type: NTC 100K beta 3950 -sensor_pin: analog11 +sensor_pin: PK3 control: watermark min_temp: 0 max_temp: 130 [fan] -pin: ar7 +pin: PH4 #[heater_fan fan1] -#pin: ar8 +#pin: PH5 [mcu] serial: /dev/ttyACM0 -pin_map: arduino [printer] kinematics: cartesian @@ -100,20 +99,20 @@ max_z_accel: 100 # "RepRapDiscount 2004 Smart Controller" type displays #[display] #lcd_type: hd44780 -#rs_pin: ar19 -#e_pin: ar42 -#d4_pin: ar18 -#d5_pin: ar38 -#d6_pin: ar41 -#d7_pin: ar40 -#encoder_pins: ^ar11, ^ar12 -#click_pin: ^!ar43 +#rs_pin: PD2 +#e_pin: PL7 +#d4_pin: PD3 +#d5_pin: PD7 +#d6_pin: PG0 +#d7_pin: PG1 +#encoder_pins: ^PB5, ^PB6 +#click_pin: ^!PL6 # "RepRapDiscount 128x64 Full Graphic Smart Controller" type displays #[display] #lcd_type: st7920 -#cs_pin: ar19 -#sclk_pin: ar18 -#sid_pin: ar42 -#encoder_pins: ^ar11, ^ar12 -#click_pin: ^!ar43 +#cs_pin: PD2 +#sclk_pin: PD3 +#sid_pin: PL7 +#encoder_pins: ^PB5, ^PB6 +#click_pin: ^!PL6 |