diff options
Diffstat (limited to 'config/generic-mks-robin-e3.cfg')
| -rw-r--r-- | config/generic-mks-robin-e3.cfg | 16 |
1 files changed, 8 insertions, 8 deletions
diff --git a/config/generic-mks-robin-e3.cfg b/config/generic-mks-robin-e3.cfg index 315e28a9..dac9d804 100644 --- a/config/generic-mks-robin-e3.cfg +++ b/config/generic-mks-robin-e3.cfg @@ -19,7 +19,8 @@ step_pin: PC0 dir_pin: PB2 enable_pin: !PC13 -step_distance: .0125 +microsteps: 16 +rotation_distance: 40 endstop_pin: ^PA12 position_endstop: 0 position_max: 165 @@ -29,7 +30,8 @@ homing_speed: 50 step_pin: PC2 dir_pin: PB9 enable_pin: !PB12 -step_distance: .0125 +microsteps: 16 +rotation_distance: 40 endstop_pin: ^PA11 position_endstop: 0 position_max: 165 @@ -39,7 +41,8 @@ homing_speed: 50 step_pin: PB7 dir_pin: !PB6 enable_pin: !PB8 -step_distance: .0025 +microsteps: 16 +rotation_distance: 8 endstop_pin: ^PC6 position_endstop: 0 position_max: 200 @@ -48,7 +51,8 @@ position_max: 200 step_pin: PB4 dir_pin: PB3 enable_pin: !PB5 -step_distance: 0.010753 +microsteps: 16 +rotation_distance: 33.500 nozzle_diameter: 0.400 filament_diameter: 1.750 heater_pin: PC9 @@ -63,28 +67,24 @@ max_temp: 250 [tmc2209 stepper_x] uart_pin: PC7 -microsteps: 16 run_current: 0.800 hold_current: 0.500 stealthchop_threshold: 250 [tmc2209 stepper_y] uart_pin: PD2 -microsteps: 16 run_current: 0.800 hold_current: 0.500 stealthchop_threshold: 250 [tmc2209 stepper_z] uart_pin: PC12 -microsteps: 16 run_current: 0.650 hold_current: 0.450 stealthchop_threshold: 30 [tmc2209 extruder] uart_pin: PC11 -microsteps: 16 run_current: 0.800 hold_current: 0.500 stealthchop_threshold: 5 |