diff options
Diffstat (limited to 'config/example.cfg')
| -rw-r--r-- | config/example.cfg | 17 |
1 files changed, 8 insertions, 9 deletions
diff --git a/config/example.cfg b/config/example.cfg index 3090ba15..d0b5eca8 100644 --- a/config/example.cfg +++ b/config/example.cfg @@ -77,19 +77,19 @@ position_min: 0.1 position_endstop: 0.5 position_max: 200 -# The stepper_e section is used to describe the stepper controlling -# the printer extruder. It has the same settings as the stepper_x -# section -[stepper_e] +# The extruder section is used to describe both the stepper +# controlling the printer extruder and the heater parameters for the +# nozzle. The stepper configuration has the same settings as the +# stepper_x section and the heater configuration has the same settings +# as the heater_bed section +[extruder] step_pin: ar19 dir_pin: ar18 enable_pin: !ar25 step_distance: .004242 max_velocity: 200000 max_accel: 3000 - -# The heater_nozzle section describes the extruder and extruder heater -[heater_nozzle] +# The remaining variables describe the extruder heater heater_pin: ar4 # PWM output pin controlling the heater thermistor_pin: analog1 @@ -118,8 +118,7 @@ max_temp: 210 # this value) # The heater_bed section describes a heated bed (if present - omit -# section if not present). It has the same settings as the -# heater_nozzle section +# section if not present). [heater_bed] heater_pin: ar3 thermistor_pin: analog0 |