diff options
| -rw-r--r-- | docs/Config_Reference.md | 17 | ||||
| -rw-r--r-- | klippy/extras/pca9632.py | 7 |
2 files changed, 18 insertions, 6 deletions
diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md index 780d5707..3763aaf8 100644 --- a/docs/Config_Reference.md +++ b/docs/Config_Reference.md @@ -2616,10 +2616,19 @@ PCA9632 LED support. The PCA9632 is used on the FlashForge Dreamer. ``` [pca9632 my_pca9632] -scl_pin: -# The SCL "clock" pin. This parameter must be provided. -sda_pin: -# The SDA "data" pin. This parameter must be provided. +#i2c_address: 98 +# The i2c address that the chip is using on the i2c bus. This may be +# 96, 97, 98, or 99. The default is 98. +#i2c_mcu: +#i2c_bus: +#i2c_speed: +# See the "common I2C settings" section for a description of the +# above parameters. +#scl_pin: +#sda_pin: +# Alternatively, if the pca9632 is not connected to a hardware I2C +# bus, then one may specify the "clock" (scl_pin) and "data" +# (sda_pin) pins. The default is to use hardware I2C. #initial_RED: 0.0 #initial_GREEN: 0.0 #initial_BLUE: 0.0 diff --git a/klippy/extras/pca9632.py b/klippy/extras/pca9632.py index a5659cfe..2016b006 100644 --- a/klippy/extras/pca9632.py +++ b/klippy/extras/pca9632.py @@ -3,7 +3,7 @@ # Copyright (C) 2022 Ricardo Alcantara <ricardo@vulcanolabs.com> # # This file may be distributed under the terms of the GNU GPLv3 license. -from . import mcp4018 +from . import bus, mcp4018 BACKGROUND_PRIORITY_CLOCK = 0x7fffffff00000000 @@ -25,7 +25,10 @@ PCA9632_WHT = 0x06 class PCA9632: def __init__(self, config): self.printer = printer = config.get_printer() - self.i2c = mcp4018.SoftwareI2C(config, 98) + if config.get("scl_pin", None) is not None: + self.i2c = mcp4018.SoftwareI2C(config, 98) + else: + self.i2c = bus.MCU_I2C_from_config(config, default_addr=98) self.prev_regs = {} pled = printer.load_object(config, "led") self.led_helper = pled.setup_helper(config, self.update_leds, 1, True) |