diff options
| -rw-r--r-- | config/sample-macros.cfg | 36 |
1 files changed, 36 insertions, 0 deletions
diff --git a/config/sample-macros.cfg b/config/sample-macros.cfg new file mode 100644 index 00000000..10854b58 --- /dev/null +++ b/config/sample-macros.cfg @@ -0,0 +1,36 @@ +# This file provides examples of Klipper G-Code macros. The snippets +# in this file may be copied into the main printer.cfg file. +# +# See the "example.cfg" file for description of common config parameters. + + +# M300 : Play tone, Beeper support, as commonly found on usual LCD displays +# i.e. RepRapDiscount 2004 Smart Controller, RepRapDiscount 12864 Full Graphic +# This defines a custom I/O pin and a custom GCODE macro +# Usage: M300 [P<ms>] [S<Hz>] P is the tone duration, S the tone frequency. +# as it is based on a PWM duty cycle, the frequency won't be pitch perfect. +# +#[output_pin BEEPER_pin] +#pin: ar37 +# Beeper pin. This parameter must be provided. +# ar37 is the default RAMPS/MKS pin. +#pwm: True +# A piezo beeper needs a PWM signal, a DC buzzer doesn't. +#value: 0 +# Silent at power on, set to 1 if active low. +#shutdown_value: 0 +# Disable at emergency shutdown (no PWM would be available anyway). +#cycle_time: 0.001 +# PWM frequency : 0.001 = 1ms will give a base tone of 1kHz +#scale: 1000 +# PWM parameter will be in the range of (0-1000 Hz). +# Although not pitch perfect. +# +#[gcode_macro M300] +#default_parameter_S=1000 +# Allows for a default 1kHz tone if S is omitted +#default_parameter_P=100 +# Allows for a default 10ms duration is P is omitted +#gcode: SET_PIN PIN=BEEPER_pin VALUE={S} +# G4 P{P} +# SET_PIN PIN=BEEPER_pin VALUE=0 |