diff options
| -rw-r--r-- | docs/Config_Changes.md | 7 | ||||
| -rw-r--r-- | docs/Config_Reference.md | 2 | ||||
| -rw-r--r-- | klippy/extras/temperature_host.py | 2 |
3 files changed, 6 insertions, 5 deletions
diff --git a/docs/Config_Changes.md b/docs/Config_Changes.md index ffc9a1fb..f2963ef2 100644 --- a/docs/Config_Changes.md +++ b/docs/Config_Changes.md @@ -8,9 +8,10 @@ All dates in this document are approximate. 20210219: The `rpi_temperature` module has been renamed to `temperature_host`. Replace any occurrences of `sensor_type: -rpi_temperature` with `sensor_type: temperature_host`. The -`rpi_temperature` name is deprecated and will be removed in the near -future. +rpi_temperature` with `sensor_type: temperature_host`. The path to +the temperature file may be specified in the `sensor_path` config +variable. The `rpi_temperature` name is deprecated and will be +removed in the near future. 20210201: The `TEST_RESONANCES` command will now disable input shaping if it was previously enabled (and re-enable it after the test). In order diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md index 701c32a3..2e048276 100644 --- a/docs/Config_Reference.md +++ b/docs/Config_Reference.md @@ -2151,7 +2151,7 @@ Temperature from the machine (eg Raspberry Pi) running the host software. ``` sensor_type: temperature_host -#path: +#sensor_path: # The path to temperature system file. The default is # "/sys/class/thermal/thermal_zone0/temp" which is the temperature # system file on a Raspberry Pi computer. diff --git a/klippy/extras/temperature_host.py b/klippy/extras/temperature_host.py index e0a665a9..3950106c 100644 --- a/klippy/extras/temperature_host.py +++ b/klippy/extras/temperature_host.py @@ -14,7 +14,7 @@ class Temperature_HOST: self.printer = config.get_printer() self.reactor = self.printer.get_reactor() self.name = config.get_name().split()[-1] - self.path = config.get("path", RPI_PROC_TEMP_FILE) + self.path = config.get("sensor_path", RPI_PROC_TEMP_FILE) self.temp = self.min_temp = self.max_temp = 0.0 |