diff options
| -rw-r--r-- | src/hc32f460/serial.c | 37 |
1 files changed, 28 insertions, 9 deletions
diff --git a/src/hc32f460/serial.c b/src/hc32f460/serial.c index 94d581d9..7cf4b6dd 100644 --- a/src/hc32f460/serial.c +++ b/src/hc32f460/serial.c @@ -28,6 +28,7 @@ #define USART_RX_PIN (Pin15) #define USART_TX_PORT (PortA) #define USART_TX_PIN (Pin09) + #define USART_NUM 1 #elif CONFIG_HC32F460_SERIAL_PC0_PC1 DECL_CONSTANT_STR("RESERVE_PINS_serial", "PC0,PC1"); @@ -35,6 +36,7 @@ #define USART_RX_PIN (Pin00) #define USART_TX_PORT (PortC) #define USART_TX_PIN (Pin01) + #define USART_NUM 1 #elif CONFIG_HC32F460_SERIAL_PA3_PA2 DECL_CONSTANT_STR("RESERVE_PINS_serial", "PA3,PA2"); @@ -42,6 +44,7 @@ #define USART_RX_PIN (Pin03) #define USART_TX_PORT (PortA) #define USART_TX_PIN (Pin02) + #define USART_NUM 1 #elif CONFIG_HC32F460_SERIAL_PH2_PB10 DECL_CONSTANT_STR("RESERVE_PINS_serial", "PH2,PB10"); @@ -49,6 +52,7 @@ #define USART_RX_PIN (Pin02) #define USART_TX_PORT (PortB) #define USART_TX_PIN (Pin10) + #define USART_NUM 3 #elif CONFIG_HC32F460_SERIAL_PA7_PA8 DECL_CONSTANT_STR("RESERVE_PINS_serial", "PA7,PA8"); @@ -56,6 +60,7 @@ #define USART_RX_PIN (Pin07) #define USART_TX_PORT (PortA) #define USART_TX_PIN (Pin08) + #define USART_NUM 1 #elif CONFIG_HC32F460_SERIAL_PA13_PA14 DECL_CONSTANT_STR("RESERVE_PINS_serial", "PA13,PA14"); @@ -63,20 +68,34 @@ #define USART_RX_PIN (Pin13) #define USART_TX_PORT (PortA) #define USART_TX_PIN (Pin14) + #define USART_NUM 1 +#endif + +#if (USART_NUM == 1) + // use USART 1 for serial connection + #define USARTx M4_USART1 + + #define USART_RX_FUNC Func_Usart1_Rx + #define USART_TX_FUNC Func_Usart1_Tx + #define USART_RI_NUM INT_USART1_RI + #define USART_TI_NUM INT_USART1_TI + #define USART_EI_NUM INT_USART1_EI + #define USART_TCI_NUM INT_USART1_TCI +#elif (USART_NUM == 3) + // use USART 3 for serial connection + #define USARTx M4_USART3 + + #define USART_RX_FUNC Func_Usart3_Rx + #define USART_TX_FUNC Func_Usart3_Tx + #define USART_RI_NUM INT_USART3_RI + #define USART_TI_NUM INT_USART3_TI + #define USART_EI_NUM INT_USART3_EI + #define USART_TCI_NUM INT_USART3_TCI #endif -// use USART 1 for serial connection -#define USARTx M4_USART1 #define USART_ENABLE (PWC_FCG1_PERIPH_USART1 | PWC_FCG1_PERIPH_USART2 | \ PWC_FCG1_PERIPH_USART3 | PWC_FCG1_PERIPH_USART4) -#define USART_RX_FUNC Func_Usart1_Rx -#define USART_TX_FUNC Func_Usart1_Tx -#define USART_RI_NUM INT_USART1_RI -#define USART_TI_NUM INT_USART1_TI -#define USART_EI_NUM INT_USART1_EI -#define USART_TCI_NUM INT_USART1_TCI - void serialError(void) |