diff options
| -rw-r--r-- | docs/G-Codes.md | 14 |
1 files changed, 11 insertions, 3 deletions
diff --git a/docs/G-Codes.md b/docs/G-Codes.md index 137d14ba..04efdbf2 100644 --- a/docs/G-Codes.md +++ b/docs/G-Codes.md @@ -811,9 +811,17 @@ The following command is available when an enabled. #### SET_PIN -`SET_PIN PIN=config_name VALUE=<value> CYCLE_TIME=<cycle_time>`: -Note - hardware PWM does not currently support the CYCLE_TIME -parameter and will use the cycle time defined in the config. +`SET_PIN PIN=config_name VALUE=<value> [CYCLE_TIME=<cycle_time>]`: Set +the pin to the given output `VALUE`. VALUE should be 0 or 1 for +"digital" output pins. For PWM pins, set to a value between 0.0 and +1.0, or between 0.0 and `scale` if a scale is configured in the +output_pin config section. + +Some pins (currently only "soft PWM" pins) support setting an explicit +cycle time using the CYCLE_TIME parameter (specified in seconds). Note +that the CYCLE_TIME parameter is not stored between SET_PIN commands +(any SET_PIN command without an explicit CYCLE_TIME parameter will use +the `cycle_time` specified in the output_pin config section). ### [palette2] |