diff options
| -rw-r--r-- | config/printer-wanhao-duplicator-i3-mini-2017.cfg | 77 |
1 files changed, 77 insertions, 0 deletions
diff --git a/config/printer-wanhao-duplicator-i3-mini-2017.cfg b/config/printer-wanhao-duplicator-i3-mini-2017.cfg new file mode 100644 index 00000000..eb6c2569 --- /dev/null +++ b/config/printer-wanhao-duplicator-i3-mini-2017.cfg @@ -0,0 +1,77 @@ +# This file contains pin mappings for the Wanhao Duplicator i3 mini. +# (circa 2017) To use this config, the firmware should be compiled +# for the AVR atmega2560. +# Pin numbers and other parameters were extracted from the official +# Marlin source available at: https://github.com/garychen99/i3Mini + +# See the example.cfg file for a description of available parameters. + +[stepper_x] +step_pin: ar22 +dir_pin: !ar23 +enable_pin: !ar57 +step_distance: 0.0125 +endstop_pin: ^!ar19 +position_endstop: 120 +position_max: 120 +homing_speed: 30.0 + +[stepper_y] +step_pin: ar25 +dir_pin: ar26 +enable_pin: !ar24 +step_distance: 0.0125 +endstop_pin: ^!ar18 +position_endstop: 0 +position_max: 135 +homing_speed: 30.0 + +[stepper_z] +step_pin: ar29 +dir_pin: ar39 +enable_pin: !ar28 +step_distance: 0.0025 +endstop_pin: ^!ar38 +position_endstop: 0.5 +position_max: 100 + +[extruder] +step_pin: ar55 +dir_pin: !ar56 +enable_pin: !ar54 +step_distance: 0.010638298 +nozzle_diameter: 0.400 +filament_diameter: 1.750 +heater_pin: ar4 +sensor_type: NTC 100K MGB18-104F39050L32 +sensor_pin: analog13 +control: pid +pid_Kp: 22.2 +pid_Ki: 1.08 +pid_Kd: 114 +min_temp: 1 +max_temp: 265 + +[fan] +pin: ar12 + +[mcu] +serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0 +baud: 250000 +pin_map: arduino + +[printer] +kinematics: cartesian +max_velocity: 300 +max_accel: 3000 +max_z_velocity: 5 +max_z_accel: 100 + +[display] +lcd_type: uc1701 +cs_pin: ar41 +a0_pin: ar40 +rst_pin: ar27 +click_pin: ^!ar5 +encoder_pins: ^ar3, ^ar2 +kill_pin: ar64 |