From 0e48c4d004ed3f5e13bafccb145269ef63d75009 Mon Sep 17 00:00:00 2001 From: Diego Barrios Romero Date: Wed, 21 Nov 2018 08:22:01 +0100 Subject: Reorganize driver capabilities --- README.md | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'README.md') diff --git a/README.md b/README.md index 90b6d6d..fb8a7c6 100644 --- a/README.md +++ b/README.md @@ -20,13 +20,14 @@ This driver allows you to: - Set the data rate. See: `set_data_rate()`. - Set the full-scale range (gain amplifier). See `set_full_scale_range()`. - Read whether a measurement is in progress. See: `is_measurement_in_progress()`. -- Set the low and high thresholds. See: `set_high_threshold_raw()`. -- Set the comparator mode. See: `set_comparator_mode()`. -- Set the comparator polarity. See: `set_comparator_polarity()`. -- Set the comparator latching. See: `set_comparator_latching()`. -- Set the comparator queue. See: `set_comparator_queue()`. -- Disable the comparator. See: `disable_comparator()`. - Set the ALERT/RDY pin to be used as conversion-ready pin. See: `use_alert_rdy_pin_as_ready()`. +- Comparator: + - Set the low and high thresholds. See: `set_high_threshold_raw()`. + - Set the comparator mode. See: `set_comparator_mode()`. + - Set the comparator polarity. See: `set_comparator_polarity()`. + - Set the comparator latching. See: `set_comparator_latching()`. + - Set the comparator queue. See: `set_comparator_queue()`. + - Disable the comparator. See: `disable_comparator()`. ## The devices -- cgit v1.2.3-54-g00ecf